Your cart
Close Alternative Icon
Installed on front of stair step: Mohawk Aluminum Stair Nose Molding Base Track for 12MM Milled Bevel. 5BASE-4 Compatibility: 12mm Thick Laminate Flooring with Installed on top of stair step: Mohawk Aluminum Stair Nose Molding Base Track for 12MM Milled Bevel. 5BASE-4 Compatibility: 12mm Thick Laminate Flooring with

Mohawk | 5BASE-4

Mohawk Aluminum Stair Nose Molding Base Track for 12MM Milled Bevel (Warehouse: THO)

  • Mohawk Aluminum Stair Nose Molding Base Track for 12MM Milled Bevel. 5BASE-4 Compatibility: 12mm Thick Laminate Flooring with "milled bevel" edge (measure plank thickness without underlayment). Use with Mohawk 5-in-1 laminate transition moldings (MINC5 part number).
  • Installed on front of stair step: Mohawk Aluminum Stair Nose Molding Base Track for 12MM Milled Bevel. 5BASE-4 Compatibility: 12mm Thick Laminate Flooring with "milled bevel" edge (measure plank thickness without underlayment). Use with Mohawk 5-in-1 laminate transition moldings (MINC5 part number).
  • Installed on top of stair step: Mohawk Aluminum Stair Nose Molding Base Track for 12MM Milled Bevel. 5BASE-4 Compatibility: 12mm Thick Laminate Flooring with "milled bevel" edge (measure plank thickness without underlayment). Use with Mohawk 5-in-1 laminate transition moldings (MINC5 part number).
Current Stock: 0
Qty: 0
/sq.ft.$34.99 /Each
Flooring Calculator
Calculate by Square Footage
Description Minus Icon

**IMPORTANT: due to material supplier issues this SKU is not expected to be in stock until March 2022 at the very earliest. 5BASE-5 can be used as a substitute as long as you cut/grind the groove on the underside of your plank joints about 1.5mm deeper to accommodate the slightly taller vertical "fin" of the track. See photo set above for an image circling this area.**

5BASE-4 Compatibility: 12mm Thick Laminate Flooring with "milled bevel" edge (measure plank thickness without underlayment)

The Mohawk aluminum stair base track allows use of any InstaForm 5-in-1 laminate wood molding (MINC5 part numbers, these are sold separately) in stair nose configuration. You can mount the track two different ways: for flush stair nose configuration or for an overlap stair nose configuration. There are multiple variations of track for difference thickness laminate flooring. Please make sure to select the track that is intended for your floor's thickness (excluding any attached or unattached underlayment thickness). For example: 7mm, 8mm, 10mm, 12mm with milled bevel, 12mm with pressed bevel.


Related Accessories Minus Icon
Close Icon